Every mechanic has faced the challenge of repairing vehicles in varying technical conditions throughout their career. A common problem is noticeable wear and tear, which means difficulty loosening spring clevises, knocking out steering knuckles, or removing exhaust manifolds.
In the past , mechanics used gas torches to remove severely seized parts. Indeed, this solution can still be found in most workshops . However, the question arises as to whether it's suitable for the material. In the case of metal, heating with a flame burns carbon, which significantly weakens the material. Proper flame adjustment is also crucial, and requires considerable experience.
First of all, operating an induction heater doesn't require any special qualifications. All you need is an understanding of the operating principle, which is similar to that of an induction cooker.
An induction heater operates on the principle of electromagnetic induction, generating an alternating magnetic field that induces eddy currents in a metal object placed in the field. These currents generate heat, leading to rapid metal heating. This eliminates the need for direct contact with the heated object, simply bringing the heater tip within 2-3 mm of the object.
You can choose between the TEKNEL ID1000 (A: 0211246) and TEKNEL IHD06 (A: 0231545) heaters.
This solution saves time because only the component in question is heated, without the risk of damaging wires or other parts. Furthermore, it doesn't precipitate carbon from the steel, preserving the material's strength. The heating time is exceptionally short – a steering knuckle can be heated to red-hot in as little as 20 seconds (depending on the device's power).
An induction heater is easy to use and, as mentioned, requires no special training. Any mechanic can use it, unlike gas torches, which require appropriate certification. Induction heaters are widely used in modern workshops: from heating bolts and pins, to loosening geometry components, to light bodywork repairs, to straightening frames in cars and trucks.
All of the equipment mentioned above, such as gas burners, induction heaters, and the opportunity to obtain welding certifications, are available at Autos . If you'd like to test the heater's suitability in your workshop, schedule a visit with a Workshop Equipment Specialist.
